Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

tank sealant

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Message
Author
derek

tank sealant

#1 PostAuthor: derek » Tue Apr 29, 2008 10:49 pm

hi, can anyone recommend a decent tank sealant,

Davy Doherty

#2 PostAuthor: Davy Doherty » Tue Apr 29, 2008 11:03 pm

That's something thats not talked about to much on here for some reason, I wonder why? as i'm sure some of the lads have had to do it, Sorry it's no help but someone will chip in i'm sure..

User avatar
foreverinthegarage
Regular Poster
Posts: 34
Joined: 2nd Jan 2008
Location: Grimsby

#3 PostAuthor: foreverinthegarage » Wed Apr 30, 2008 1:32 am

hi
Just had to do my tank. I asked Dave at Z-power and he put me onto another company in Liegh. The product is called Kreem seal and its FANTASTIC, took two days so did it over a week end. First a etcher (left over night) then a cleaner then a sealer. The liner that you end up with is so thin so your tank wont end up twise the as heavy. Before i treated the tank i had many carb problems and leaks from over flows. Now all cured. Cost £35.00
And this will do three tanks.

Regards Mick
Z1000 The King Is Still Alive.

User avatar
AL MARSHALL
100Club
100Club
Posts: 241
Joined: 13th Feb 2007
Location: BURTON ON TRENT/ TAMWORTH

tank sealant

#4 PostAuthor: AL MARSHALL » Wed Apr 30, 2008 7:54 am


User avatar
1340fxd
100Club
100Club
Posts: 160
Joined: 20th Apr 2007
Location: New Forest, Hampshire

#5 PostAuthor: 1340fxd » Wed May 07, 2008 9:51 pm

Hi - I did my tank over last winter and used this:

http://www.frost.co.uk/item_Detail.asp? ... ostSubcat=

Works a treat and is silver metallic colour so you really don't notice it's there when filling the tank
Dear Santa, please can I have...

User avatar
Geoff Meager
Custard Cream
Custard Cream
Posts: 732
Joined: 5th Apr 2007
Location: Dereham. Norfolk.

#6 PostAuthor: Geoff Meager » Wed May 07, 2008 10:05 pm

Yes ............ but if the tank has been done a few years ago..will the new sealant & etcher still work ?????
Mine has a brown ( like varnish ) ressidue inside which has started to flake off.
So is it worth me trying to reseal it again ????

User avatar
RALPHARAMA
Area Rep.
Area Rep.
Posts: 2752
Joined: 19th May 2007
Location: Pensford, Somerset
Contact:

#7 PostAuthor: RALPHARAMA » Wed May 07, 2008 11:24 pm

I wonder if the brown shite is actually a build up of petrol varnish?
Ralph Ferrand
Z1000A1 (1977), Godier Genoud Z1300A5 (1983), Z900A4 Stock (1976), Z900A4 Special (project), GPZ1100 Unitrak (1983), ZRX1200R (2004) DT175MX (1981).

http://www.bikerstoolbox.co.uk

Don't be caught out http://www.dhlparcels.info/

User avatar
Steve S
100Club
100Club
Posts: 490
Joined: 10th Nov 2006
Location: Surrey

#8 PostAuthor: Steve S » Thu May 08, 2008 8:29 am

Exactly, so how best do we look after our tanks? is it a necessity to seal them up just because they are old or can we clean them out and remove the gum.
I guess if they are rusting then sealing is a good idea and will protect your tank and fuel system from clogging,but should we seal them before we get to that point :?:

User avatar
bedlow1
Custard Cream
Custard Cream
Posts: 850
Joined: 25th Nov 2004
Location: Buckinghamshire

#9 PostAuthor: bedlow1 » Thu May 08, 2008 4:42 pm

one of my tanks has light brown rust and i too recon that this is working into the carbs so something needs to be done.
my concern is that i dont want chemicals to ruin the paintwork on the tank which is in good condition, any tips
Now where did I leave my Keys!
1972 Z1 Euro Spec
1975 Z1B UK Bike

User avatar
Geoff Meager
Custard Cream
Custard Cream
Posts: 732
Joined: 5th Apr 2007
Location: Dereham. Norfolk.

#10 PostAuthor: Geoff Meager » Fri May 09, 2008 8:53 pm

Was chatting to the geezer who sorted out my bike.. about the tank sealant question ....he recommends a teaspoon of oil in the tank every-time you fill up..
suppose it works on the same principle as Diesel (but not so oily) as a Diesel tank don't suffer the same corrosion as a Petrol one

anyone heard this before :?:

User avatar
z1bnackerkwacker
100Club
100Club
Posts: 407
Joined: 20th May 2006
Location: Swansea

#11 PostAuthor: z1bnackerkwacker » Sat Jun 14, 2008 11:19 pm

Geoff Meager wrote:Mine has a brown ( like varnish ) ressidue inside which has started to flake off.

http://www.frost.co.uk/item_Detail.asp? ... ostSubcat=

Mine had same brown varnish, above kit "MARINE CLEAN part of kit cleaned" it (use nuts & bolts inside if really rough), no prob', followed instructions, plenty of rinses and hair dryer in cap and dry thoroughly (must thank the missus), did mine approx 3 years ago and still fine, Remember to keep old fluid can be used again, I poured mine away without thinking :roll:

You could do several tanks with the kit..


Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 48 guests