Page 1 of 1
Boyer Branston ignition Z1000A1
Posted: Tue Oct 06, 2020 6:48 pm
Author: drydockdavies
Anyone fitted one? Micro digital
I must be having a senior moment, can't make head nor tail of the instructions!
Re: Boyer Branston ignition Z1000A1
Posted: Wed Oct 07, 2020 7:16 am
Author: kev edwards
Remove the weights from advancer you don't need them or the cam, just keep them in the box, and the advancer needs a mark on it at 40 degrees for full advance if not already got one, then follow instructions, not the best in the world but they are correct.
Re: Boyer Branston ignition Z1000A1
Posted: Wed Oct 07, 2020 12:53 pm
Author: zed1015
As the previous post but i would put it back in the box , stick it on Ebay and then go buy a Dyna 'S'.
Re: Boyer Branston ignition Z1000A1
Posted: Wed Oct 07, 2020 7:15 pm
Author: drydockdavies
Thanks Kev,
It's the strobe timing which is spinning my head! First read through of instructions I thoughts they meant the F mark but they mean Full advance at 5000rpm. Very bottom of instructions page states that Z1000 may not have Full Advance mark and explains how to do it.
I'll have to ring Boyer and get them to talk me through it. Just not getting it!!!
Re: Boyer Branston ignition Z1000A1
Posted: Wed Oct 07, 2020 9:22 pm
Author: chrisu
Mr Ogden is very familiar with these I believe
Re: Boyer Branston ignition Z1000A1
Posted: Thu Oct 08, 2020 7:17 am
Author: kev edwards
Looks like you have full advance marks to the left of the pins put a bit of tipex in the 1+4 one and go from there, i have installed a fair amount of these over the years, not on a zed though, but the instructions for all are like this, cottage industry for you.
Re: Boyer Branston ignition Z1000A1
Posted: Thu Oct 08, 2020 7:30 am
Author: Bill P
As the other Gent said ebay it and get a Dyna S take's a few minutes to fit and no extra box to mount either
