Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Backwards bolt?
Moderators: paul doran, Taffus, KeithZ1R, chrisu
-
- new poster
- Posts: 4
- Joined: 20th Sep 2019
- Location: Grays
Re: Backwards bolt?
For future reference , easy outs are very good . You drill a pilot hole and screw the easy out in which has a left hand spiral and this unscrews the broken off screw or bolt . Small good quality set less than a tenner
-
- 100Club
- Posts: 118
- Joined: 25th Oct 2017
- Location: stockport
Re: Backwards bolt?
I have always found cheap easy outs can snap all to easily and leave a piece of hardened steel inside the sheared bolt. The methods outlined earlier in this post are much better options IMHO.
Re: Backwards bolt?
Blackseven wrote:I have always found cheap easy outs can snap all to easily and leave a piece of hardened steel inside the sheared bolt. The methods outlined earlier in this post are much better options IMHO.
+1.
'In your twenties you think you are immortal, in your thirties you hope you are immortal, in your forties you just hope it doesn't hurt too much'
Lemmy
Lemmy
Re: Backwards bolt?
Mr Bump wrote:Blackseven wrote:I have always found cheap easy outs can snap all to easily and leave a piece of hardened steel inside the sheared bolt. The methods outlined earlier in this post are much better options IMHO.
+1.
+2
- warren3200gt
- Hardcore
- Posts: 2736
- Joined: 13th Jun 2014
- Location: Dartford Kent
Re: Backwards bolt?
Easy outs = devils spawn.
PUM 488 June 2023
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
-
- Hardcore
- Posts: 2051
- Joined: 3rd Apr 2009
- Location: leverington UK
Re: Backwards bolt?
Well done that man, a little more advice don't buy your kitchen roll at M&S, you can get much cheaper anywhere else.
Who is online
Users browsing this forum: r3sc, wilsonsjw11 and 169 guests