Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Changing front end of a b1
Moderators: chrisu, paul doran, Taffus, KeithZ1R
-
Kawasakiboy
- new poster
- Posts: 6
- Joined: 13th Feb 2018
- Location: Navan
Changing front end of a b1
What front end is best to replace on my gpz B1 I'm looking at either zzr 11 or perhaps a zx9r any views on which is best or is there another I could go for any suggestions would be appreciated
Re: Changing front end of a b1
ZRX11/1200
These are 1/2 " longer than zzr11 ones and take 90mm calipers which are better.
Bandit ones work well also.(and are easier to find) (90mm calipers also.)
The advantage of zzr 11 yokes is the top one whilst ugly gives extra height as its stepped.
So best combination for height would be ZRX11/12 Forks and zzr11 yokes.
These are 1/2 " longer than zzr11 ones and take 90mm calipers which are better.
Bandit ones work well also.(and are easier to find) (90mm calipers also.)
The advantage of zzr 11 yokes is the top one whilst ugly gives extra height as its stepped.
So best combination for height would be ZRX11/12 Forks and zzr11 yokes.
-
Kawasakiboy
- new poster
- Posts: 6
- Joined: 13th Feb 2018
- Location: Navan
Re: Changing front end of a b1
Thanks for that .. that's great info .. Could I bother you again to ask which model zzr is best suited for the zrx .. or the bandit forks...
Who is online
Users browsing this forum: No registered users and 33 guests