Does anybody have any experience of changing the cam chain without breaking the whole engine. If so where would you get a chain and soft link from
Hope someone can help
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1r cam chain
Moderators: chrisu, paul doran, Taffus, KeithZ1R
- Mikekilbride
- Regular Poster
- Posts: 56
- Joined: 20th Nov 2018
- Location: Chorley Lancashire
Z1r cam chain
This old GIT keeping the old "kawi's" rolling 5 x Z1's. 3 x 72' H2's. 2 x 73' H2's. 2 x 74 H1's. 1 x 71 H1. 1 x W1 and finally 2 x 69' A7SS
Re: Z1r cam chain
Kev1R wrote:Got mine from Z Power
+1
Keith
You can never have too many tools in your life, except the two legged variety
I'm never wrong, once I thought I was but I was
mistaken.
Phil Churchett winner 2013
You can never have too many tools in your life, except the two legged variety
I'm never wrong, once I thought I was but I was
mistaken.
Phil Churchett winner 2013
- Mikekilbride
- Regular Poster
- Posts: 56
- Joined: 20th Nov 2018
- Location: Chorley Lancashire
Re: Z1r cam chain
Is it possible to change it without breaking the engine down?
This old GIT keeping the old "kawi's" rolling 5 x Z1's. 3 x 72' H2's. 2 x 73' H2's. 2 x 74 H1's. 1 x 71 H1. 1 x W1 and finally 2 x 69' A7SS
Re: Z1r cam chain
Mikekilbride wrote:Is it possible to change it without breaking the engine down?
Not recommended, but has been done successfully many times.
adrianhorsfield@live.co.uk
Sunny Bournemouth. Dorset. UK.
Sunny Bournemouth. Dorset. UK.
- Mikekilbride
- Regular Poster
- Posts: 56
- Joined: 20th Nov 2018
- Location: Chorley Lancashire
Re: Z1r cam chain
Thanks Adrian
I have had loads of success with joining chain but figured this one in the Z1r I’ve re built was still ok so I’ve left it. I figured quit while ahead and not risk catastrophe
Mike
I have had loads of success with joining chain but figured this one in the Z1r I’ve re built was still ok so I’ve left it. I figured quit while ahead and not risk catastrophe
Mike
This old GIT keeping the old "kawi's" rolling 5 x Z1's. 3 x 72' H2's. 2 x 73' H2's. 2 x 74 H1's. 1 x 71 H1. 1 x W1 and finally 2 x 69' A7SS
Re: Z1r cam chain
for the few extra hours to split the cases and fit an endless chain i've always done that.
Who is online
Users browsing this forum: sockpuppet and 71 guests