Any one advise who to send my crankshaft to it need a new rod its a gpz1100 shaft with 18 mm pins
Ray Deben did my last one but he's off at the moment
Is anyone out there as good?
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Crankshaft
Moderators: paul doran, Taffus, KeithZ1R, chrisu
-
- 100Club
- Posts: 124
- Joined: 9th Mar 2005
- Location: weston super mare
Crankshaft
75 z1b 75 h2c z1100r rd400 z1000a1 TS125
Re: Crankshaft
probably cheaper to buy this as its like new & only done 10k ? it would probably cost you £60 in return postage to send it to sep
https://www.ebay.co.uk/itm/kawasaki-z11 ... ition=3000
https://www.ebay.co.uk/itm/kawasaki-z11 ... ition=3000
Last edited by z1bman on Thu Jan 21, 2021 9:56 pm, edited 1 time in total.
Re: Crankshaft
Due to my own personal experiences with SEP, I wouldn't trust them one bit.
They repeatedly lie and the workmanship is not much better. The worst company I have ever had the mispleasure to deal with ever.
Personally I would go to Chris Applebee, one of the best there is.
They repeatedly lie and the workmanship is not much better. The worst company I have ever had the mispleasure to deal with ever.
Personally I would go to Chris Applebee, one of the best there is.
Kawasaki GPz750T, Kawasaki ZRX1100R, Kawasaki GPZ1000RX, H**** VF1000RG Rothmans, H**** VF500F2F, H**** CB1100RD, Suzuki GSX1100EFE, H**** XL125K2
Re: Crankshaft
I used SEP years ago to do a zzr1100 crank and they were great.
Used them more recently to make a liner and they took many months to admit they didn't have the material. In the end they got the job done and didn't balls it up. A mate of mine who ran a workshop till recently had no end of trouble with them over some head repair that they bolloxed up.
Buzzard has sorted me a head rebuild and a rebore more recently and done a fine job both times. He's who I'd ask 1st from now on.
Olly
Used them more recently to make a liner and they took many months to admit they didn't have the material. In the end they got the job done and didn't balls it up. A mate of mine who ran a workshop till recently had no end of trouble with them over some head repair that they bolloxed up.
Buzzard has sorted me a head rebuild and a rebore more recently and done a fine job both times. He's who I'd ask 1st from now on.
Olly
'In your twenties you think you are immortal, in your thirties you hope you are immortal, in your forties you just hope it doesn't hurt too much'
Lemmy
Lemmy
-
- 100Club
- Posts: 124
- Joined: 9th Mar 2005
- Location: weston super mare
Re: Crankshaft
Thanks all I rang Appleby today had a long chat very impressed with the call so I'm sending it next week
75 z1b 75 h2c z1100r rd400 z1000a1 TS125
Re: Crankshaft
Hi Si, I had Chris do my last 1000a1 crank had to have new rods, big ends, index, balance and weld. The bike now has hardly any vibration and I did not fall off the chair when the bill came through either.
Z1b, z1000a1 x 2 , Aprilia v4 Tuono factory, SV1000
-
- 100Club
- Posts: 124
- Joined: 9th Mar 2005
- Location: weston super mare
Re: Crankshaft
Great thanks I rang Ray Debben he did it last time but he only sends them to Chris
Ill post it off Monday
Ill post it off Monday
75 z1b 75 h2c z1100r rd400 z1000a1 TS125
Who is online
Users browsing this forum: No registered users and 158 guests