Has anyone else had a problem getting the piston out of the front brake caliper while trying to renew the seals,?
The piston comes out but hits the mounting bracket which doesn’t leave enough room to pull piston out,,,!
On a 1976 Z900 single front caliper,,,?
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z900 caliper
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Re: Z900 caliper
Hi Stogmuller
you have to remove the mounting bracket first by unscrewing the two bolts.
put the piston back in the caliper before you can remove the mounting bracket.
Good luck
GrtZ
Philippe
you have to remove the mounting bracket first by unscrewing the two bolts.
put the piston back in the caliper before you can remove the mounting bracket.
Good luck
GrtZ
Philippe
the differences between a little boy and an adult man is the price and size of their toys!
-
Stogmuller
- Regular Poster
- Posts: 57
- Joined: 22nd Jan 2019
- Location: Liverpool
Re: Z900 caliper
Aha,,,sorted,,,,piston fully in rotate mounting bkt, 
Who is online
Users browsing this forum: No registered users and 23 guests