Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1100r carb set up
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Z1100r carb set up
Just swapped over to an original fuel tap which now has a vacuum feed so want to set the carb pipe work up to standard, have also fitted a kerker so don’t know if I will need to rejet as well but need a base set up as it runs like a pig. Looking at cmsl the vacuum set up is 1 and 4 linked and 2 and 3 linked with a T piece to the vacuum feed on the tap. Is that correct as some show them blanked of with a cap?? Would you also recommend a full strip down and clean of carbs first, bike been stood for years I believe. Cheers
Who is online
Users browsing this forum: No registered users and 115 guests