Hi everyone
Does anyone know where I can get 4 of these spacers/ plugs part no. 43088-002 or can give me the dimensions so I can get some made
Cheers
Gavin
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000 caliper spacers
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Z1000 caliper spacers
Z1000 MK2
Z1300 DFI
Z1300 DFI
Re: Z1000 caliper spacers
At some risk Gavin are you actually sure they are missing ? they are a pretty tight fit so would need knocking out, so basically put if the two holes at the back of the caliper are M10 sized and not around 25mm then they are in situe
Keith
You can never have too many tools in your life, except the two legged variety
I'm never wrong, once I thought I was but I was
mistaken.
Phil Churchett winner 2013
You can never have too many tools in your life, except the two legged variety
I'm never wrong, once I thought I was but I was
mistaken.
Phil Churchett winner 2013
Re: Z1000 caliper spacers
Cheers Keith, I will check, it appears when I pull the lever the calipers, well the left one has quite a lot of movement before the pad touches the disc.
Z1000 MK2
Z1300 DFI
Z1300 DFI
Re: Z1000 caliper spacers
Well it appears all 4 are missing and pretty unavailable in the UK, so need to come up with a plan B which looks like getting a batch of M10x16mm shim washers and using them as the spacers.
Need to go to a plan C the washer I mentioned are exactly 10mm ID so no clearance, bugger.
Need to go to a plan C the washer I mentioned are exactly 10mm ID so no clearance, bugger.
Z1000 MK2
Z1300 DFI
Z1300 DFI
Re: Z1000 caliper spacers
Well come up with a plan C, using some Aluminium spacers I have found on flea bay, can someone in the know tell me do these Plugs/spacers sit flush with the surface 6mm or slightly set under flush.
Cheers
Gavin
Cheers
Gavin
Z1000 MK2
Z1300 DFI
Z1300 DFI
Who is online
Users browsing this forum: Stugill and 165 guests