1977 z1000a1 rear master cylinder o ring

[windymilla1]

Hi
Anyone know of a supplier for the rear brake master cylinder square section o ring, I know redline supply them in the US but wondered if anyone has found a british supplier, apparently the measurements are OD 52 mm. The height is 2,85 mm, the width is 2,35 mm.

Thanks in anticipation.
Windy

[Philippe]

Hi Windy

I see you joined the club almost one year ago.
This is your first post and you didn't intruduce yourself.
On this forum, and on others, it's a custom to introduce yourself shortly and eventually to post a picture of your bike(s).
If you start with a question, you don't make a good impression...
I don't write this to lecture you, I only write this to help you to get an answer from people who know where you can find the part you're looking for.
Greetings from Belgium
Philippe

[ADRIAN H]

Zpower should sell them. The preferred supplier, if you are a full paid up member you get a 10% discount

[tlc]

There is nothing special about the O ring.
They do wear and give odd measurements when old.

Just go to your local bearing supplier and they should be able to help.