Hi
Anyone know of a supplier for the rear brake master cylinder square section o ring, I know redline supply them in the US but wondered if anyone has found a british supplier, apparently the measurements are OD 52 mm. The height is 2,85 mm, the width is 2,35 mm.
Thanks in anticipation.
Windy
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
1977 z1000a1 rear master cylinder o ring
Moderators: paul doran, Taffus, KeithZ1R, chrisu
-
- new poster
- Posts: 4
- Joined: 1st Jul 2020
- Location: Newcastle
Re: 1977 z1000a1 rear master cylinder o ring
Hi Windy
I see you joined the club almost one year ago.
This is your first post and you didn't intruduce yourself.
On this forum, and on others, it's a custom to introduce yourself shortly and eventually to post a picture of your bike(s).
If you start with a question, you don't make a good impression...
I don't write this to lecture you, I only write this to help you to get an answer from people who know where you can find the part you're looking for.
Greetings from Belgium
Philippe
I see you joined the club almost one year ago.
This is your first post and you didn't intruduce yourself.
On this forum, and on others, it's a custom to introduce yourself shortly and eventually to post a picture of your bike(s).
If you start with a question, you don't make a good impression...
I don't write this to lecture you, I only write this to help you to get an answer from people who know where you can find the part you're looking for.
Greetings from Belgium
Philippe
the differences between a little boy and an adult man is the price and size of their toys!
Re: 1977 z1000a1 rear master cylinder o ring
Zpower should sell them. The preferred supplier, if you are a full paid up member you get a 10% discount
adrianhorsfield@live.co.uk
Sunny Bournemouth. Dorset. UK.
Sunny Bournemouth. Dorset. UK.
Re: 1977 z1000a1 rear master cylinder o ring
There is nothing special about the O ring.
They do wear and give odd measurements when old.
Just go to your local bearing supplier and they should be able to help.
They do wear and give odd measurements when old.
Just go to your local bearing supplier and they should be able to help.
Asphalt Cowboy Z1100R, 1981 Z1000J
Who is online
Users browsing this forum: No registered users and 133 guests