Page 1 of 1
Valve guide seals
Posted: Fri Jun 04, 2021 5:31 pm
Author: Zedorset
Hi All
I think i have a piston ring gone, so a top end strip down is imminent, Whilst she is in bits a head refurb seems a sensible thing to do. What is the consensus on valve guide seals, genuine v pattern. Your thoughts please?
Re: Valve guide seals
Posted: Fri Jun 04, 2021 6:00 pm
Author: warren3200gt
I use suzuki viton valve seals.
Re: Valve guide seals
Posted: Fri Jun 04, 2021 6:11 pm
Author: zed1015
Viton.. Get them from Nick Pepper as Suzuki performance ( He's on ebay too ).
Re: Valve guide seals
Posted: Fri Jun 04, 2021 6:42 pm
Author: Zedorset
Thanks for the info
Re: Valve guide seals
Posted: Fri Jun 04, 2021 6:47 pm
Author: Zedorset
is the GS1000 seals ?
Re: Valve guide seals
Posted: Fri Jun 04, 2021 7:00 pm
Author: Zedorset
Zedorset wrote:is the GS1000 seals ?
i am a dislexic sod, that should read
Is that the GS 1000?
Re: Valve guide seals
Posted: Fri Jun 04, 2021 10:08 pm
Author: zed1015
Guides and seals are the same for GS1000/750 and Z1000/900/750/650 etc.
Nick lists them as Z9/1000 seals etc to make it simple..
https://www.ebay.co.uk/itm/362100452380 ... Swc6JaVdqJ
Re: Valve guide seals
Posted: Sat Jun 05, 2021 6:30 pm
Author: kev edwards
Nick gets his stuff out pretty quick as well, i go there if i need anything quick and always have a chat, only 5 minutes drive from my house.
Re: Valve guide seals
Posted: Sun Jun 06, 2021 8:51 pm
Author: Zedorset
Thanks for the info, I have ordered some,
