Page 1 of 1
Replace Ignition Key Switch
Posted: Sat Jul 10, 2021 2:58 am
Author: Wayne1960
Hi i have swapped out the steering lock and seat lock from the 3 new items i purchased from Z Power. does anyone have a simple step by step guide for replacing the ignition switch please?
Re: Replace Ignition Key Switch
Posted: Sat Jul 10, 2021 12:35 pm
Author: Philippe
Hi Wayne1960
for what kind of model ? Z1 or Z900A4 ? or Z1000 ?
GrtZ
Philippe
Re: Replace Ignition Key Switch
Posted: Sat Jul 10, 2021 2:15 pm
Author: Wayne1960
Hi Philippe i hoped you might answer.
Its a 1976 Z900 A4
Re: Replace Ignition Key Switch
Posted: Sat Jul 10, 2021 3:14 pm
Author: chrisu
if you remove or lower the headlight bowl (take off the light unit and remove 1 of the indicator stems. this gets you more room.
remove idiot light cover.
disconnect ign switch
unscrew round black plastic bit from top of switch.
drop switch out from the bottom
refit in reverse.
Re: Replace Ignition Key Switch
Posted: Sat Jul 10, 2021 3:30 pm
Author: Wayne1960
Perfect thanks
Re: Replace Ignition Key Switch
Posted: Sat Jul 10, 2021 4:25 pm
Author: Philippe
Hi Wayne
I was too late to check your answer...
Chris was faster !!!
Just do it as he says, I couldn't do it better.
GrtZ
Philippe
Re: Replace Ignition Key Switch
Posted: Sun Jul 11, 2021 8:57 am
Author: Wayne1960
Ok the inevitable happened and the wires in the male plug came out leaving only the white attached!
How do i connect the wires back into the male brass pins!
Re: Replace Ignition Key Switch
Posted: Sun Jul 11, 2021 11:33 am
Author: chrisu
new plug with new pins is what i'd do - try vehicle wiring products or bikerstoolbox
Re: Replace Ignition Key Switch
Posted: Sat Jul 17, 2021 8:07 am
Author: Wayne1960
Ok new plug fitted and all good. well nearly! the neutral light decided to play up and doesn't come on
checked in neutral
checked lamp with new and the lamp is ok
checked the 2 wires brown and red/green and they look ok
is it something simple?