Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
J motor into an early frame
Moderators: chrisu, paul doran, Taffus, KeithZ1R
J motor into an early frame
I am sure this has been done a few times . Just asking if a J motor needs much work or what is needed to fit in an A1 frame . Thanks
"Be on good terms with all persons. Speak your truth quietly and clearly, and listen to others; even the dull and ignorant. They, too, have their story."
Re: J motor into an early frame
Yes it can be done, the length is very similar and it will go.
Some people only use the one front mount of the J but personally I would add a lower front engine mount to the frame as the J has two.
Some people only use the one front mount of the J but personally I would add a lower front engine mount to the frame as the J has two.
Re: J motor into an early frame
KWACKERZ1 wrote:Yes it can be done, the length is very similar and it will go.
Some people only use the one front mount of the J but personally I would add a lower front engine mount to the frame as the J has two.
Thanks.
"Be on good terms with all persons. Speak your truth quietly and clearly, and listen to others; even the dull and ignorant. They, too, have their story."
Who is online
Users browsing this forum: Gray17 and 43 guests