Back again!
Any suggestions on how I might freshen these up, RHS is similar but has a grubby white insert in the 'Pink' starter button. I don't want to paint them unless it is the last resort. I know there is a product for restoring PVC but not sure if it is effective or suitable on these parts?
Any ideas?
P
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Switch gear
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Switch gear
- Attachments
-
Re: Switch gear
this is good stuff but expensive i used to use it when i worked for cradley kawasaki effective on all plastics & you only need a small amount
https://www.ebay.co.uk/itm/202777004583 ... Swe8ldcBKU
https://www.ebay.co.uk/itm/202777004583 ... Swe8ldcBKU
Re: Switch gear
Thanks Z1Bman, I have an account with wurth, I'll call them in the morning.
Re: Switch gear
Rubbing ACF 50 corrosion prevention jollop into plastics like that will bring them back to life for very little effort. I don't think it'll make the red switch look like new but it'll help.
Olly
Olly
'In your twenties you think you are immortal, in your thirties you hope you are immortal, in your forties you just hope it doesn't hurt too much'
Lemmy
Lemmy
Who is online
Users browsing this forum: No registered users and 87 guests