Apologies if Im in the wrong place but I was looking for an inventory of the club's tools?
Im just starting out on a bare metal frame up renovation and while I managed to drift out the head bearings I now need to press in the tapered needle rollers and wondered if the club has a set of bearing race press tool. Ill need to move on to extracted brake pistons etc at some point and there's the sing arm bearings to come out and be replaced but before I go and spend a shed load of money I just wanted to know what was available.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Tools (Club Tools Loan Stock)
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Tools (Club Tools Loan Stock)
Zedbedee Zz
Big Zed medium zed and little zed
Z1000 LTD Z900 ltd z650 B1
I’m normally doing something.
Quite often its something wrong?
Its just I don’t realise until later.
Big Zed medium zed and little zed
Z1000 LTD Z900 ltd z650 B1
I’m normally doing something.
Quite often its something wrong?
Its just I don’t realise until later.
Re: Tools (Club Tools Loan Stock)
Ask Jerry his numbers in the book or PM
Re: Tools (Club Tools Loan Stock)
Thanks will do.
Got the head off tonight and the old bearings out. They were taper needle rollers after all. I was expecting them to be balls. But as Ide already bought new replacements from Zed Power I decided to carry on and drift the old ones off.
Got the head off tonight and the old bearings out. They were taper needle rollers after all. I was expecting them to be balls. But as Ide already bought new replacements from Zed Power I decided to carry on and drift the old ones off.
Zedbedee Zz
Big Zed medium zed and little zed
Z1000 LTD Z900 ltd z650 B1
I’m normally doing something.
Quite often its something wrong?
Its just I don’t realise until later.
Big Zed medium zed and little zed
Z1000 LTD Z900 ltd z650 B1
I’m normally doing something.
Quite often its something wrong?
Its just I don’t realise until later.
Re: Tools (Club Tools Loan Stock)
Club loan tools are listed in the yearbook
Who is online
Users browsing this forum: No registered users and 170 guests