Page 1 of 1
clutch rod question
Posted: Fri Jun 03, 2022 8:26 am
Author: kz1000mark
hi all
Just taken my side cover off and cant see a pushrod !! its the later type screw actuator 1980 i assume all had pushrods the only reason i took it of was the clutch is heavy and noticed so hows my clutch working in that case .confused
Re: clutch rod question
Posted: Fri Jun 03, 2022 8:38 am
Author: warren3200gt
Re: clutch rod question
Posted: Fri Jun 03, 2022 8:59 am
Author: kz1000mark
Hi Warren
its a 1980 G1 classic less the efi lol
Re: clutch rod question
Posted: Fri Jun 03, 2022 10:05 am
Author: warren3200gt
Re: clutch rod question
Posted: Fri Jun 03, 2022 10:37 am
Author: kz1000mark
SO HOW THE HELL IS THE CLUTCH WORKING WITHOUT THAT
Re: clutch rod question
Posted: Fri Jun 03, 2022 10:58 am
Author: kz1000mark
warren3200gt wrote:2022_06_03_11.04.12.jpg
THANKS WARREN
Re: clutch rod question
Posted: Fri Jun 03, 2022 2:10 pm
Author: warren3200gt
Short answer, it wouldn't work without it.
Which means it's either still in there or you dropped it without noticing. It's big enough so shouldn't be hard to find.
Re: clutch rod question
Posted: Fri Jun 24, 2022 7:50 pm
Author: ADRIAN H
Its probably still in the engine.