Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

900 rear wheel spacer dims

Need help restoring, building, or finding then try here.

Moderators: paul doran, Taffus, KeithZ1R, chrisu

Post Reply
Message
Author
User avatar
RALPHARAMA
Area Rep.
Area Rep.
Posts: 2752
Joined: 19th May 2007
Location: Pensford, Somerset
Contact:
Contact RALPHARAMA

900 rear wheel spacer dims

#1 PostAuthor: RALPHARAMA » Fri Jun 03, 2022 2:25 pm

3328C452-E4D3-4E14-93EB-61FFF9FE5F32.jpeg


Anyone able to tell me the dimensions of the spacer that goes between the sprocket carrier and the inside of the swinging arm on an A4?
Can’t find one so need to make one .

cheers
Ralph Ferrand
Z1000A1 (1977), Godier Genoud Z1300A5 (1983), Z900A4 Stock (1976), Z900A4 Special (project), GPZ1100 Unitrak (1983), ZRX1200R (2004) DT175MX (1981).

http://www.bikerstoolbox.co.uk

Don't be caught out http://www.dhlparcels.info/
Top
User avatar
warren3200gt
Hardcore
Hardcore
Posts: 2732
Joined: 13th Jun 2014
Location: Dartford Kent

Re: 900 rear wheel spacer dims

#2 PostAuthor: warren3200gt » Sat Jun 04, 2022 5:05 am

Assuming they have stock. Alternatively measure internal and external dims from carrier and axel. Width is 11mm.
https://www.z-power.co.uk/rear-axle-col ... 977---1981
PUM 488 June 2023
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
Top
User avatar
CAT3
100Club
100Club
Posts: 427
Joined: 20th Jun 2011
Location: South Manchester

Re: 900 rear wheel spacer dims

#3 PostAuthor: CAT3 » Sun Jun 05, 2022 10:37 am

A lot of seals have their dimensions printed on the outside face in a series of a group of three numbers. You might be able to read the seal dimensions, which would give you the outside diameter too.
Top
User avatar
RALPHARAMA
Area Rep.
Area Rep.
Posts: 2752
Joined: 19th May 2007
Location: Pensford, Somerset
Contact:
Contact RALPHARAMA

Re: 900 rear wheel spacer dims

#4 PostAuthor: RALPHARAMA » Sun Jun 05, 2022 1:36 pm

All made and ready to be fitted .... all I have to do now is find what I did with the bag of brand spanking new cush drive rubbers :lol:

It's only a dry build so I can leave the rubbers out for now. They'll come to light when I have bought a new set on the final build :roll:
Ralph Ferrand
Z1000A1 (1977), Godier Genoud Z1300A5 (1983), Z900A4 Stock (1976), Z900A4 Special (project), GPZ1100 Unitrak (1983), ZRX1200R (2004) DT175MX (1981).

http://www.bikerstoolbox.co.uk

Don't be caught out http://www.dhlparcels.info/
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: Mally and 174 guests