Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
sprocket side spacer
Moderators: paul doran, Taffus, KeithZ1R, chrisu
sprocket side spacer
Hi all i have a 1978 Z1000-A2 on spoked wheels. I'm in process of putting it back together and have realised that for some reason the previous owner has put the inner spacer on the outside. So i need a new outer spacer. Does anyone know the dimensions so i can get made up locally? Obviously i can figure out the inner and out diameters easily but the length is the tricky bit. I can see the question has been asked before in the form but can't find the answer. Thanks
Re: sprocket side spacer
these may be of some help
Keith
You can never have too many tools in your life, except the two legged variety
I'm never wrong, once I thought I was but I was
mistaken.
Phil Churchett winner 2013
You can never have too many tools in your life, except the two legged variety
I'm never wrong, once I thought I was but I was
mistaken.
Phil Churchett winner 2013
Re: sprocket side spacer
holy moly KeithZ1R is there such a thing as too much information.
Thank you very much.
Thank you very much.
Re: sprocket side spacer
I think that is fantastic information from Keith and it’s great that it will be here to be referenced in the future.
I had a need for the very same information a while ago and that would have helped greatly.
Thanks very much Keith.
I had a need for the very same information a while ago and that would have helped greatly.
Thanks very much Keith.
Who is online
Users browsing this forum: No registered users and 180 guests