Hi all
I'm refurbishing my switchgear (Z1000-A1) and the plastic bit where the dipswitch attaches is broken. See photo...
I might be able to fix it but it's very small, so...
Anyway, I figured these were the same on most seventies Kwacks, but an eBay search has been fruitless. Anybody out there got a spare one?
Cheers
Theo
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Spare bits for LH switchgear needed - 70s Zeds
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Spare bits for LH switchgear needed - 70s Zeds
2006 Bonneville T100 (lightly customised) and Z1000-A1 (nearly finished!!!)
- warren3200gt
- Hardcore
- Posts: 2744
- Joined: 13th Jun 2014
- Location: Dartford Kent
Re: Spare bits for LH switchgear needed - 70s Zeds
Dab of superglue and fit the black bit and screw while wet.
Don't know of any available repop so a (possibly) knackered secondhand one is the the alternative.
Don't know of any available repop so a (possibly) knackered secondhand one is the the alternative.
PUM 488 June 2023
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
Re: Spare bits for LH switchgear needed - 70s Zeds
I have a box of bits wich I belive includes somme prettu rough from the outside switchgear.
I cant look until Saturday but if I havent reponded direct message me and ill see what ive got.
I cant look until Saturday but if I havent reponded direct message me and ill see what ive got.
Zedbedee Zz
Big Zed medium zed and little zed
Z1000 LTD Z900 ltd z650 B1
I’m normally doing something.
Quite often its something wrong?
Its just I don’t realise until later.
Big Zed medium zed and little zed
Z1000 LTD Z900 ltd z650 B1
I’m normally doing something.
Quite often its something wrong?
Its just I don’t realise until later.
Re: Spare bits for LH switchgear needed - 70s Zeds
Steve Burgess on Facebook 3D prints the switch part
Kwaki lover - Z1000R2, ZX9R F1P, GPz1100B1, 350 S2 and a brace of 500 H1's. For fun I've got a couple of LC's too yahooooo
Re: Spare bits for LH switchgear needed - 70s Zeds
Thanks for all the suggestions guys! Will follow these up. I do also have a Plastex kit that I might be able to do a decent repair with.
2006 Bonneville T100 (lightly customised) and Z1000-A1 (nearly finished!!!)
- Z1streetfighter71
- Custard Cream
- Posts: 628
- Joined: 16th Oct 2020
- Location: Galway-Eire
Re: Spare bits for LH switchgear needed - 70s Zeds
Iv used this a few times and more than happy with the results, it can be molded or sculpted before it dries.
Re: Spare bits for LH switchgear needed - 70s Zeds
Thanks for all the info guys. I had a go at it with Plastex and it worked ok (well I've reassembled it and it hasn't fallen apart yet).
2006 Bonneville T100 (lightly customised) and Z1000-A1 (nearly finished!!!)
Who is online
Users browsing this forum: No registered users and 194 guests