Page 1 of 1
Spare bits for LH switchgear needed - 70s Zeds
Posted: Wed Jan 11, 2023 6:42 pm
Author: TiBolts
Hi all
I'm refurbishing my switchgear (Z1000-A1) and the plastic bit where the dipswitch attaches is broken. See photo...
I might be able to fix it but it's very small, so...
Anyway, I figured these were the same on most seventies Kwacks, but an eBay search has been fruitless. Anybody out there got a spare one?
Cheers
Theo
Re: Spare bits for LH switchgear needed - 70s Zeds
Posted: Wed Jan 11, 2023 6:58 pm
Author: warren3200gt
Dab of superglue and fit the black bit and screw while wet.
Don't know of any available repop so a (possibly) knackered secondhand one is the the alternative.
Re: Spare bits for LH switchgear needed - 70s Zeds
Posted: Wed Jan 11, 2023 8:29 pm
Author: Zebedee
I have a box of bits wich I belive includes somme prettu rough from the outside switchgear.
I cant look until Saturday but if I havent reponded direct message me and ill see what ive got.
Re: Spare bits for LH switchgear needed - 70s Zeds
Posted: Thu Jan 12, 2023 9:19 am
Author: MikeP
Steve Burgess on Facebook 3D prints the switch part
Re: Spare bits for LH switchgear needed - 70s Zeds
Posted: Thu Jan 12, 2023 10:30 am
Author: TiBolts
Thanks for all the suggestions guys! Will follow these up. I do also have a Plastex kit that I might be able to do a decent repair with.
Re: Spare bits for LH switchgear needed - 70s Zeds
Posted: Thu Jan 12, 2023 11:36 am
Author: Z1streetfighter71
Iv used this a few times and more than happy with the results, it can be molded or sculpted before it dries.
Re: Spare bits for LH switchgear needed - 70s Zeds
Posted: Mon Jan 30, 2023 3:36 pm
Author: TiBolts
Thanks for all the info guys. I had a go at it with Plastex and it worked ok (well I've reassembled it and it hasn't fallen apart yet).