Z1000st Rear master cylinder repair kit

[Mrglee]

Got all the brake parts I need but can't find a seal/repair kit for the rear master if no longer available what are my options?

[LTD Project]

you can still get a new piston, rubber seals and spring from CMSNL, so I guess z-power should be able to get them too.

[moizeau]

Have you tried this place
https://powerhouse.uk/motorcycle-brake- ... t-service/

Very recommended

[Philippe]

Hi Mrglee

have look at this:

https://www.z-power.co.uk/z1000e1e2-st/ ... r-cylinder
these are original Kawasaki parts.

There's a pattern replacement available too.
GrtZ
Philippe

[Mrglee]

Cheers guys but z-power only have kits for the E1 with resivor built into master model mines a e2 which has a separate resivor connected by a short hose nobody seems to have one anymore.
So any suggestions on how to get round this problem would really be appreciated.

[moizeau]

Did you contact Powerhouse?

[Mrglee]

Yes I did but they don't have them either from what I understand the master cylinder (43020-1015) was only fitted for a very limited time but have found two places one in America £100 and Australia on eBay for £50 that can supply the two rubber seals.

[LTD Project]

https://www.cmsnl.com/kawasaki-kz1000e2 ... 66560.html

Which part numbers are you referring to?

[z1bman]

According to csml the part no for the piston is the same as the z1000 a1 & other models so this should fit

https://www.z-power.co.uk/piston-rear-master-cylinder

[Mrglee]

Have already been advised this will not fit here's a pic of mine