Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Z1000 exhaust flanges

Need help restoring, building, or finding then try here.

Moderators: paul doran, Taffus, KeithZ1R, chrisu

Post Reply
Message
Author
User avatar
bigdjag
Regular Poster
Posts: 38
Joined: 22nd Mar 2013
Location: Aberdeen

Z1000 exhaust flanges

#1 PostAuthor: bigdjag » Thu Apr 27, 2023 3:05 pm

Can anyone tell me if the Z900 exhaust flanges with the 6mm bolt holes will fit the Z1000 if i were to drill the holes out to 8mm as they look the same and there looks like there's enough meat on them to drill them out. :?:
Thanks
Top
Philippe
Hardcore
Hardcore
Posts: 2003
Joined: 26th Oct 2017
Location: België

Re: Z1000 exhaust flanges

#2 PostAuthor: Philippe » Thu Apr 27, 2023 5:55 pm

Hi bigdjag

yes, they will fit but why would you do that?
Buy new exhaust crowns from Z-Power an sell the original Z900 exhaust crowns . I think there are a lot of people who'll want to buy them.
GrtZ
Philippe
the differences between a little boy and an adult man is the price and size of their toys!
Top
User avatar
bigdjag
Regular Poster
Posts: 38
Joined: 22nd Mar 2013
Location: Aberdeen

Re: Z1000 exhaust flanges

#3 PostAuthor: bigdjag » Thu Apr 27, 2023 6:08 pm

Thanks for the reply
It's just I got a set of Z900 ones from a friend but the bolt holes are 6mm and I need 8mm for my Z1000. So if they fit all I need to do is drill them out to 8mm and that will make them fit my bike. But I will also look into the ones at Z power
Thanks again
Top
User avatar
Simonic
100Club
100Club
Posts: 455
Joined: 4th Dec 2017
Location: Ossett

Re: Z1000 exhaust flanges

#4 PostAuthor: Simonic » Fri Apr 28, 2023 5:37 am

https://www.z-power.co.uk/exhaust-clamp-set-8mm
'83 ZX1100 '81 Z1000ST, '04 GSX1400, '19 Dodge Challenger Hemi
Top
needaz1100r
ZedHead
ZedHead
Posts: 1128
Joined: 11th Sep 2012
Location: Reading
Contact:
Contact needaz1100r

Re: Z1000 exhaust flanges

#5 PostAuthor: needaz1100r » Mon May 01, 2023 1:48 pm

bigdjag wrote:Thanks for the reply
It's just I got a set of Z900 ones from a friend but the bolt holes are 6mm and I need 8mm for my Z1000. So if they fit all I need to do is drill them out to 8mm and that will make them fit my bike. But I will also look into the ones at Z power
Thanks again


They will also have unplated 8mm holes in them and be more prone to rust.
Cheers,

Mark.
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 159 guests