Can anyone tell me if the Z900 exhaust flanges with the 6mm bolt holes will fit the Z1000 if i were to drill the holes out to 8mm as they look the same and there looks like there's enough meat on them to drill them out.
Thanks
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000 exhaust flanges
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Re: Z1000 exhaust flanges
Hi bigdjag
yes, they will fit but why would you do that?
Buy new exhaust crowns from Z-Power an sell the original Z900 exhaust crowns . I think there are a lot of people who'll want to buy them.
GrtZ
Philippe
yes, they will fit but why would you do that?
Buy new exhaust crowns from Z-Power an sell the original Z900 exhaust crowns . I think there are a lot of people who'll want to buy them.
GrtZ
Philippe
the differences between a little boy and an adult man is the price and size of their toys!
Re: Z1000 exhaust flanges
Thanks for the reply
It's just I got a set of Z900 ones from a friend but the bolt holes are 6mm and I need 8mm for my Z1000. So if they fit all I need to do is drill them out to 8mm and that will make them fit my bike. But I will also look into the ones at Z power
Thanks again
It's just I got a set of Z900 ones from a friend but the bolt holes are 6mm and I need 8mm for my Z1000. So if they fit all I need to do is drill them out to 8mm and that will make them fit my bike. But I will also look into the ones at Z power
Thanks again
Re: Z1000 exhaust flanges
'83 ZX1100 '81 Z1000ST, '04 GSX1400, '19 Dodge Challenger Hemi
-
- ZedHead
- Posts: 1128
- Joined: 11th Sep 2012
- Location: Reading
- Contact:
Re: Z1000 exhaust flanges
bigdjag wrote:Thanks for the reply
It's just I got a set of Z900 ones from a friend but the bolt holes are 6mm and I need 8mm for my Z1000. So if they fit all I need to do is drill them out to 8mm and that will make them fit my bike. But I will also look into the ones at Z power
Thanks again
They will also have unplated 8mm holes in them and be more prone to rust.
Cheers,
Mark.
Mark.
Who is online
Users browsing this forum: No registered users and 180 guests