Page 1 of 1
Z1000 exhaust flanges
Posted: Thu Apr 27, 2023 3:05 pm
Author: bigdjag
Can anyone tell me if the Z900 exhaust flanges with the 6mm bolt holes will fit the Z1000 if i were to drill the holes out to 8mm as they look the same and there looks like there's enough meat on them to drill them out.
Thanks
Re: Z1000 exhaust flanges
Posted: Thu Apr 27, 2023 5:55 pm
Author: Philippe
Hi bigdjag
yes, they will fit but why would you do that?
Buy new exhaust crowns from Z-Power an sell the original Z900 exhaust crowns . I think there are a lot of people who'll want to buy them.
GrtZ
Philippe
Re: Z1000 exhaust flanges
Posted: Thu Apr 27, 2023 6:08 pm
Author: bigdjag
Thanks for the reply
It's just I got a set of Z900 ones from a friend but the bolt holes are 6mm and I need 8mm for my Z1000. So if they fit all I need to do is drill them out to 8mm and that will make them fit my bike. But I will also look into the ones at Z power
Thanks again
Re: Z1000 exhaust flanges
Posted: Fri Apr 28, 2023 5:37 am
Author: Simonic
Re: Z1000 exhaust flanges
Posted: Mon May 01, 2023 1:48 pm
Author: needaz1100r
bigdjag wrote:Thanks for the reply
It's just I got a set of Z900 ones from a friend but the bolt holes are 6mm and I need 8mm for my Z1000. So if they fit all I need to do is drill them out to 8mm and that will make them fit my bike. But I will also look into the ones at Z power
Thanks again
They will also have unplated 8mm holes in them and be more prone to rust.