Hi Guys, anyone point me in the right direction for ring gap and piston and bore clearance. For a 0.50 over sized re-bore. I've just had it done but before re-assembly I want to be 100% sure. As it all seems very tight to me !!!!
Thanks in advance for your help.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1r Re bore sizes
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Re: Z1r Re bore sizes
I'm just at the point of checking the ring gaps on my engine before assembly and from memory they should be 0.2mm minimum to about 0.4mm. The service wear limit is 0.7mm.
I can't help on the piston/bore clearance at the moment - I'm at work and my workshop manual is at home...
I can't help on the piston/bore clearance at the moment - I'm at work and my workshop manual is at home...
Re: Z1r Re bore sizes
piston to cylinder clearance = .060-.079 mm
Re: Z1r Re bore sizes
Thanks very much
Who is online
Users browsing this forum: Bing [Bot] and 24 guests