Hi.
I don't expect to be shim adjustments that often on my B2 but was looking at getting a removal tool anyway. Any body had experience with these?
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Large Shim tools.
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Large Shim tools.
- Attachments
-
- kawasaki Shim tool.jpg (47.08 KiB) Viewed 2715 times
Re: Large Shim tools.
Hello mate;
Yep, got something similar, except mine has a knurled grip instead of the ball on that one. Works just fine once you get the knack; top tip is to either make sure your hands are free of oil, or wrap a bit of blue roll or similar around the grip so you can get a good purchase. Oh, and don't accidentally put the w-shaped bit of the tool in so it JUST rests against the top of the shim rather than the top edge of the bucket, and then wonder why you can't pop said shim out...
TTFN Grog
Yep, got something similar, except mine has a knurled grip instead of the ball on that one. Works just fine once you get the knack; top tip is to either make sure your hands are free of oil, or wrap a bit of blue roll or similar around the grip so you can get a good purchase. Oh, and don't accidentally put the w-shaped bit of the tool in so it JUST rests against the top of the shim rather than the top edge of the bucket, and then wonder why you can't pop said shim out...
TTFN Grog
1979 Z1R (mostly - it's been fiddled with a bit)
1977 Z650B1 - I'll get round to putting it back together one day...
1977 Z650B1 - I'll get round to putting it back together one day...
Who is online
Users browsing this forum: No registered users and 174 guests