Hi, anyone fitted a set of Paolo Tarozzi rear sets on a Z900-A4?
Very basic part’s diagram supplied, but no fitting instructions. I’m happy enough with the gear linkage side…but a bit confused with the rear brake setup (drum)…it’s the ‘return spring’ linkage and actuator rod fitting that’s got me stumped. (Standard existing setup in first photo).
I’ve emailed the company, but no reply….if anyone has fitted these and could send me some photos of the rear brake setup that’d be great. Cheers.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Paolo Tarozzi rearsets on a Z900-A4
Moderators: paul doran, Taffus, KeithZ1R, chrisu
- Paul Whitehouse
- 100Club
- Posts: 295
- Joined: 20th Sep 2005
- Location: Crawley, West Sussex
- Contact:
Paolo Tarozzi rearsets on a Z900-A4
If it's too loud....too bad.
Phil Churchett Award Winner 2014
Phil Churchett Award Winner 2014
Re: Paolo Tarozzi rearsets on a Z900-A4
I am sure you have to use the original Return spring on the new linkage
Who is online
Users browsing this forum: No registered users and 188 guests