Cleaning out the Crankcase Threads with chasers after aqua blasting........
Am I right in saying that the three threads used in the cases are M6 and M8
Are there any smaller or larger than these that I have missed?
Looking at the design of thread chasers online.... is it enough to take a couple of old bolts and run a hacksaw down them to use as chasers / thread cleaners?
I was going to use Taps, but is would seem that this is an ill-advised approach and could well do more harm than good.
Thoughts?
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Thread chasing / cleaning
Moderators: paul doran, Taffus, KeithZ1R, chrisu
-
LTD Project
- 100Club
- Posts: 255
- Joined: 31st Aug 2008
- Location: York, North Yorkshire
Thread chasing / cleaning
Help and motivation always required......
KZ1000 B4 under light restoration.
KZ1000 B4 under light restoration.
Who is online
Users browsing this forum: Bing [Bot], ChrisB, r3sc, wilsonsjw11 and 152 guests