I need to remove the fuel tap from my A4 tank and blank the threaded entry off to clean and treat the tank internally and from what I've found, I believe that the thread for the fuel tap is 22mmx1.0mm? Struggling to get anything like this - could always use a tapered rubber bung but I wondered if anyone else has had a previous (better) solution?
Cheers in advance for any help
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Fuel Tap Blanking Cap
Moderators: paul doran, Taffus, KeithZ1R, chrisu
-
bulldogbobby
- 100Club
- Posts: 243
- Joined: 19th Feb 2008
- Location: Norfolk England
Fuel Tap Blanking Cap
Last edited by bulldogbobby on Thu Jan 11, 2024 10:24 am, edited 1 time in total.
Let The Good Times Roll...........
Re: Fuel Tap Blanking Bolt
i used a tapered rubber bung to block it up temporarily
Re: Fuel Tap Blanking Bolt
"Set the GRINDER on it"
Re: Fuel Tap Blanking Bolt
Rubber bung is the best method.
adrianhorsfield@live.co.uk
Sunny Bournemouth. Dorset. UK.
Sunny Bournemouth. Dorset. UK.
Re: Fuel Tap Blanking Bolt
An old fuel tap in the off position works a treat
-
bulldogbobby
- 100Club
- Posts: 243
- Joined: 19th Feb 2008
- Location: Norfolk England
Re: Fuel Tap Blanking Cap
Thanks as always for all the help and thanks Gus - Cap on order 
Let The Good Times Roll...........
Who is online
Users browsing this forum: No registered users and 178 guests