Page 1 of 1
Fuel Tap Blanking Cap
Posted: Wed Jan 10, 2024 3:22 pm
Author: bulldogbobby
I need to remove the fuel tap from my A4 tank and blank the threaded entry off to clean and treat the tank internally and from what I've found, I believe that the thread for the fuel tap is 22mmx1.0mm? Struggling to get anything like this - could always use a tapered rubber bung but I wondered if anyone else has had a previous (better) solution?
Cheers in advance for any help
Re: Fuel Tap Blanking Bolt
Posted: Wed Jan 10, 2024 4:16 pm
Author: chrisu
i used a tapered rubber bung to block it up temporarily
Re: Fuel Tap Blanking Bolt
Posted: Wed Jan 10, 2024 4:32 pm
Author: Gus
Re: Fuel Tap Blanking Bolt
Posted: Wed Jan 10, 2024 5:59 pm
Author: ADRIAN H
Rubber bung is the best method.
Re: Fuel Tap Blanking Bolt
Posted: Wed Jan 10, 2024 7:22 pm
Author: KevinH
An old fuel tap in the off position works a treat
Re: Fuel Tap Blanking Cap
Posted: Thu Jan 11, 2024 10:39 am
Author: bulldogbobby
Thanks as always for all the help and thanks Gus - Cap on order
