Hello All,
Could anyone please let me know what the thread in on the throttle stop screw?
I'm fairly certain that it is M5 fine - looks like M5 x 0.5mm pitch. Mine has been replated and plating thickness means that it will no longer fit into the threaded hole on the carb mounting plate.
I need to buy a die to recut thread but thought I would check - just in case...
Thanks in advance.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Throttle stop screw
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Re: Throttle stop screw
If you mean the single tick over screw I say it is M6 x 0.75
Gus
Gus
"Set the GRINDER on it"
Re: Throttle stop screw
Thanks for the reply Gus.
It's definitely 5mm diameter so M5 but the thread looks finer than normal. I think it's M5 x 0.5 but wanted to check before buying a die - photo below -
It's definitely 5mm diameter so M5 but the thread looks finer than normal. I think it's M5 x 0.5 but wanted to check before buying a die - photo below -
Re: Throttle stop screw
Sorry I'm lost as to which part you are talking about.
Try https://www.partzilla.com/catalog/kawasaki/motorcycle to find the part you are asking about.
Sorry
Gus.
Try https://www.partzilla.com/catalog/kawasaki/motorcycle to find the part you are asking about.
Sorry
Gus.
"Set the GRINDER on it"
Re: Throttle stop screw
Count the number of threads in a 10mm length. 20 threads in a 10mm length and its 0.5mm pitch. It looks that way from the photo. I would give it a good wire brushing first as running a die down it risks it becoming small and loose. Is it the screw or the nut / plate it turns into that is in need of cleaning?
AL
AL
1981 J1
Re: Throttle stop screw
Hello Gus - I think that it's part 69 on the diagram in the link below
https://www.partzilla.com/catalog/kawas ... arburetors
It the screw that set the limit of how far the throttle can be opened - presumably to protect slide linkages.
Thanks Al - really good point about wire brushing the thread - I should have thought of this....
I think that the tapped hole in the plate is good - I screwed a .22 phosphor bronze brush through and the thread looks like new.
https://www.partzilla.com/catalog/kawas ... arburetors
It the screw that set the limit of how far the throttle can be opened - presumably to protect slide linkages.
Thanks Al - really good point about wire brushing the thread - I should have thought of this....
I think that the tapped hole in the plate is good - I screwed a .22 phosphor bronze brush through and the thread looks like new.
Who is online
Users browsing this forum: Bing [Bot], r3sc, wilsonsjw11 and 205 guests