Have people successfully managed this check and what method did they use to hold one gear absolutely static, so as to isoloate/check the movement of the other gear?
With thanks
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Checking Gear Backlash
Moderators: paul doran, Taffus, KeithZ1R, chrisu
-
LTD Project
- 100Club
- Posts: 255
- Joined: 31st Aug 2008
- Location: York, North Yorkshire
Checking Gear Backlash
When trying to complete the check as per manual pic below, it seems impossible to hold (by hand) the drive shaft gear in a fixed state so you can check the backlash on the output shaft gear. The DTI gauge is all over the place.
Have people successfully managed this check and what method did they use to hold one gear absolutely static, so as to isoloate/check the movement of the other gear?
With thanks
Have people successfully managed this check and what method did they use to hold one gear absolutely static, so as to isoloate/check the movement of the other gear?
With thanks
Help and motivation always required......
KZ1000 B4 under light restoration.
KZ1000 B4 under light restoration.
Who is online
Users browsing this forum: kz900B1 and 173 guests