Can someone confirm that this unit is fubar
1&2 shows nothing
3&4 show 774 ohms
5&6 had to set meter at 2m ohms got 1.1 for 5 and 1.4 for 6
I take it that's 1.1 & 1.4 million ohms?
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000st IC ignited testing
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Re: Z1000st IC ignited testing
Yes thats 1.1 and 1.4 milion ohms which is very high compared to what it should be. Make sure fingers are not touching probes as moist fingers can cause readings to show when on high resistance ranges.
I take it there is no spark!
I take it there is no spark!
Re: Z1000st IC ignited testing
Also touch probes together when changing resistance ranges to make sure meter reads zero before measuring
Re: Z1000st IC ignited testing
I do have a spark but very weak and orange will start the bike eventually I ran the tests again making sure nothing was touching got the same results looks like I need to replace this unit.
Who is online
Users browsing this forum: No registered users and 123 guests