Can anyone point me to a good supplier for O-Rings in my 1981 Z1000J CV Carbs?
I need the latest (viton?) type o-rings.
1). O-Rings for float valve buckets
2). O-Rings for the small push in plug that covers the idle/pilot jets
Thank you
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000J Carb O-Rings
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Re: Z1000J Carb O-Rings
The float valve seats are the same as my Z1000R2 and I've used viton ones from simplybearings.co.uk . Off the top of my head I think they're 7mm x 1.5mm (ID x o-ring section). Less tha £5 for 10
I haven't replaced the pilot plug seal but it's the same measuring theory as above.
I haven't replaced the pilot plug seal but it's the same measuring theory as above.
Kwaki lover - Z1000A1, Z1000R2, ZX9R F1P, GPz1100B1, 350 S2 and a brace of 500 H1's. For fun I've got a hooligan 350LC too yahooooo
Re: Z1000J Carb O-Rings
Thank you
Who is online
Users browsing this forum: No registered users and 31 guests