Z1OwnersClub GB

Hello gents does anyone know if a 4 into 1 exhaust made for a gpz1100 b1 would fit on the unitrack model many thanks in advance.
John

Here , might need to tweak the search button for your exact model .

https://delkevic.co.uk/s/Kawasaki/GPZ1100/1983

Thanks very much for your help

The part numbers aren't the same so i'm guessing they don't fit each other.

it might fit ok at the headers, but only need a different bracket made at the back for the back box

Thanks for that iv'e seen a Kerker copy for sale unfortunately its for the gpz1100b1 so might just need the rear bracket modifying.

yes but will probably need a rear support bracket made

Centre stand may not fit right up

Few years ago I built a gpz1100 b1. Bought a kerker that fitted perfectly then I fitted a zrx1100 swingarm and because of the brace the pipe wouldn't fit, but a simple bit of cutting and re-welding and it was fine, anyone who can weld should be able to make it fit ok.

Many thanks for your replies gents.