Z1OwnersClub GB

Hi Guys,
I’ve just come to install my rear wheel on my Z1000A1 after having both wheels rebuilt only to discover I’ve lost the cush plate spacer. Item 13.

I thought I’d quickly make one, but I need to know the dimension from the sholder to the end.

All the other dimensions I can work out from the bearings. But without that one I stumped.

Can anyone help?

Thanks in advance,

Paul

Hi Keith,
Thanks for the reply.
Did your spacer come from a set of wire wheels? The 28mm dimension looks a bit long.
I made a spacer with 22mm from shoulder to end and the cush plate was sticking out of the hub to far. I skimmed it down to 18mm and the cush plate / hub look about right. Plus, the wheel now fits in the swinging arm.
I might stick with this and see how it rides.

Paul