Z1OwnersClub GB

Posted: **Wed Aug 20, 2008 11:33 am**

I got an MRE quick-shifter, all works OK, but the electric over air solenoid has a slight leak.....
It works OK, but has a slow weep thru the exhaust :evil:

Anyone got ideas where I can get spares (the donut rubber seal) :?:

Not a lot of places do 12 volt air/electric solenoids :cry:

Need this for Santa Pod to crack the 11.5 :twisted:

.... Brownie Points allowing :shock:

Also on a diet, before anyone comments :roll:

Posted: **Wed Aug 20, 2008 11:35 am**

Might be statin` the obvious but have you tried Camozzi at your local hose centre ?

Posted: **Wed Aug 20, 2008 12:34 pm**

BSL (Bearing Services Limited) or Pirtek are usually quite good

Posted: **Wed Aug 20, 2008 1:25 pm**

Don`t go to Pirtek unless you want to spend more than is necessary.
I would agree that Bearing Services Ltd are the place to go.

Posted: **Wed Aug 20, 2008 2:55 pm**

J&L Industrial Supply

Posted: **Wed Aug 20, 2008 4:07 pm**

do yu no steve smith.. used to av a 9 wiv underseat twin harris.. hees da bloke tu talk tu abart air shifters...

if yu hav probs gis a shart an ile giv yu is number

w

Posted: **Wed Aug 20, 2008 5:59 pm**

MRERACE@aol.com

Debbens also sell them so may know where to get spares.

Z1OwnersClub GB

MRE air/electric kwik shifter

MRE air/electric kwik shifter