Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

GPZ1100 B2 CARBS

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
crocks

GPZ1100 B2 CARBS

#1 PostAuthor: crocks » Mon Sep 29, 2008 7:32 pm

hi all, bought a b2 in large pieces last spring, it came with 36mm mikuni cv carbs , the bike runs real bad - spitting back and it wont rev out, is it worth trying to sort them or should i invest in some 33mm smoothbores. any advice welcome . steve
Top
User avatar
Pigford
I'm on prescription!!
Posts: 10566
Joined: 2nd Jan 2006
Location: Hampshire Coast UK

#2 PostAuthor: Pigford » Mon Sep 29, 2008 7:39 pm

Check the fuel & vacuum lines are correct.....
Check ALL rubber lines & manifolds for cracks = air leaks....
Check the diaphrams in the top of the CV carbs... they are prone to perishing/splitting....
Assuming ignition system is all OK :wink:
And on the 7th day... Zeds were created!
Top
User avatar
london calling
Hardcore
Hardcore
Posts: 2255
Joined: 16th Apr 2004
Location: Loughborough, East Midlands

#3 PostAuthor: london calling » Mon Sep 29, 2008 9:13 pm

Steve,I've sent you a PM :wink:
Jack
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 60 guests