Page 1 of 1
CDI Mk2
Posted: Tue Feb 24, 2009 7:26 pm
Author: electromecracing
Hi all
Im just about to send my "ignitor" unit away for test/repair and i was thinking it may be of advantage to ask if anyone had ever delt with this company before
http://www.electrexworld.co.uk/#1X0 ?? .
Regards
Curtis
Posted: Tue Feb 24, 2009 7:32 pm
Author: phil churchett
Yes, i have had one of their replacement regulators on my A4 for years.
They seem OK to deal with.
Just a tip, mark it in some way.
Posted: Tue Feb 24, 2009 8:11 pm
Author: Z1RII
any other ignitor from 1000ST, 1000J, GPZ1100, Z750, Z400, Z550 etc. will work and much cheeper on ebääh or parts dealer
Posted: Tue Feb 24, 2009 8:28 pm
Author: Pigford
My neighbour used then for a replacement secondary ignition coil, they sent the wrong one
He phoned them & they sent the right one immediately, & told him to return the wrong one as & when
Good service overall
Posted: Wed Feb 25, 2009 6:31 pm
Author: Rich
Mk2 ignitor is bigger than J gpz etc, uses different coils with a ballast resistor.