Hi to you all, I have a z1b fitted with newtronic eletronic ignition and was wondering if anybody knows how to check that it is correctly set up ?.
I dont have any known problems with the system Iwould just like to check it before the bike goes on the road. the bike is standard in all ther respects
any suggestions would be kindly accepted.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Newtronic Ignition System
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Newtronic Ignition System
They run, They break , You spend and so it goes on
- rickman CRR
- Custard Cream
- Posts: 609
- Joined: 13th Dec 2004
- Location: Scotland
http://www.lumenition.com/newtronic/
Perhaps you should contact the new owners for an instruction leaflet.
Most systems can be checked by strobe light?
Perhaps you should contact the new owners for an instruction leaflet.
Most systems can be checked by strobe light?
I think the Newtronics is the old Pirahna optical system. If it is optically triggered, make sure you do NOT set it up in bright sunlight! Ideally do it when the sun is NOT out or cloudy or even better in the garage with minimal lighting. The optics can be confused in "bright light" (ET?) and your timing will be out.
And on the 7th day... Zeds were created!
Who is online
Users browsing this forum: No registered users and 70 guests