Page 1 of 2
Desperate to identify these !!!
Posted: Sun Apr 12, 2009 6:16 pm
Author: Z1B Alan
I am still desperate to identify which carbs are fitted to my bike, kindly view the photos and suggest which model they are from. Currently running 115 mains and 15 pilot jets my problem is they don't seem to match any listed in the Clymer manual with the current jetting.
Hope the photo of the tickover adjusment helps with identifing which carbs these are that are fitted to my bike.
I would also once identification has been made need advice on correct jetting when fitted to a standard Z1B
Posted: Sun Apr 12, 2009 6:30 pm
Author: PJ
They look like 26mm z1000 carbs - but the tickover adj on the bottom?
Posted: Sun Apr 12, 2009 6:32 pm
Author: mikey
Im most probably wrong but with tickover adjuster on the bottom they look like the carbs that were on my GS1000
Posted: Sun Apr 12, 2009 6:34 pm
Author: tlc
Airscrew on the side. Z900A4 ?
Posted: Sun Apr 12, 2009 6:35 pm
Author: foreverinthegarage
Z1R has the tickover adjuster on the bottom
Re: Desperate to identify these !!!
Posted: Sun Apr 12, 2009 6:36 pm
Author: zedrider
Z1B Alan wrote:I am still desperate to identify which carbs are fitted to my bike, kindly view the photos and suggest which model they are from. Currently running 115 mains and 15 pilot jets my problem is they don't seem to match any listed in the Clymer manual with the current jetting.
Hope the photo of the tickover adjusment helps with identifing which carbs these are that are fitted to my bike.
I would also once identification has been made need advice on correct jetting when fitted to a standard Z1B
try Nrp
www.nrp-carbs.com
post
Posted: Sun Apr 12, 2009 6:36 pm
Author: ted1r
Sticking me neck out 28mm Z1r
Posted: Sun Apr 12, 2009 6:37 pm
Author: 000zeds
Possibly from a Z1000 MK11
Posted: Sun Apr 12, 2009 6:37 pm
Author: PAULJAC47
Look like the carbs fitted to early Suzuki gs850/1000 will work fine if you are not bothered with original fitment Cheers Paulj....
Posted: Sun Apr 12, 2009 6:38 pm
Author: chrisu
agree - Z1R carbs
Posted: Sun Apr 12, 2009 6:39 pm
Author: sweptail
26mm z1000a1 me thinks. Z1b usually runs 28mm.
post
Posted: Sun Apr 12, 2009 6:41 pm
Author: ted1r
WHOOOO got sumfink right
Ted
Posted: Sun Apr 12, 2009 6:43 pm
Author: PAULJAC47
Just looked in Gs1000 manual these carbs are the same as fitted with adjuster underneath!!!
Posted: Sun Apr 12, 2009 7:11 pm
Author: hillbilly
i have a set like that,and they are off a gs1000.hope it helps.
Posted: Sun Apr 12, 2009 8:57 pm
Author: zeroed
look the same as ones on my Z1000a1 26mm(maybe 28mm?) tho that`s an educated guess, i`m no expert