Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Electrical Gremlins Z1A

Need help restoring, building, or finding then try here.

Moderators: paul doran, Taffus, KeithZ1R, chrisu

Post Reply
Message
Author
Bruce Sexton

Electrical Gremlins Z1A

#1 PostAuthor: Bruce Sexton » Mon Jun 08, 2009 12:18 pm

Help needed on this one.
This is strange, any working ok for many years the stop warning light in the tacho has stopped working. I have checked the bulb thats ok, but I have voltage at the bulb holder when the brakes are off but not enough for the bulb and when the brake is applied I get zero volts at the bulb holder, I would have thought it should be the other way around? I have tried another bulb and the existing bulb works, so any ideas you guy's as electrics arn't my favourite.

Thanks

Bruce
Top
GEZ635
100Club
100Club
Posts: 257
Joined: 12th Mar 2002
Location: BIRMINGHAM

hi

#2 PostAuthor: GEZ635 » Mon Jun 08, 2009 2:40 pm

Under the tank and connected to your wiring loom near the coils is an outage switch, well I think thats what the manual calls it(rubber block about 3 inches long with a small plug in connector). It will be that.

Gez
Gez
Top
Bruce Sexton

#3 PostAuthor: Bruce Sexton » Tue Jun 09, 2009 7:17 am

Thanks for that Gez. Off to the wanted section.

Bruce
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: scott and 201 guests