Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Z1000 A1 New Project

Work in Progress

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
DavidZ1R
Hardcore
Hardcore
Posts: 1513
Joined: 12th Jun 2011
Location: Bolton Lancs

Z1000 A1 New Project

#1 PostAuthor: DavidZ1R » Sat Sep 17, 2016 5:41 pm

I have bought this off Martin B, been on here before, but I am undertaking to bring it back to life, as it was meant to be.

Image

Started to strip her down

Image

Finding all the faults

Image

Alot of the wires had been cut and 'modified'

Image

Some parts off for plating, chroming, powder coating

Image

The left mud guard was on the bike, very poor state, I bought the one on the right from germany for 20 euro, much better, of for chrome.
Image
Image

Hubs cleaned up and new bearings fitted

Image

Calipers re furbished and ready
Image

The disc brakes are wrong, wrong size and rear one wrong bike altogether, hunting for standard ones, if anyone has any?

Will post more as I go.
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R
Top
User avatar
Garry.L
Hardcore
Hardcore
Posts: 3140
Joined: 11th Jun 2011
Location: Cheapest Cheshire

#2 PostAuthor: Garry.L » Sat Sep 17, 2016 8:00 pm

Great Start David.

When it's done you'll be in a VERY exclusive club, ie a genuine UK A1 looking how the good people at KHI intended.

You sorted for paint?.
ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ
Top
DavidZ1R
Hardcore
Hardcore
Posts: 1513
Joined: 12th Jun 2011
Location: Bolton Lancs

#3 PostAuthor: DavidZ1R » Sat Sep 17, 2016 8:48 pm

Not yet Garry but will contact you for your blingy paint man, she who should be obeyed wants a blue paint job not wine red. :lol:
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R
Top
DavidZ1R
Hardcore
Hardcore
Posts: 1513
Joined: 12th Jun 2011
Location: Bolton Lancs

#4 PostAuthor: DavidZ1R » Mon Sep 26, 2016 3:11 pm

Got my frame and bits back from triple s powder coatings , chrome guys stating two to three months :shock:

Image
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R
Top
User avatar
000zeds
ZedHead
ZedHead
Posts: 1207
Joined: 30th Dec 2005
Location: Kent

#5 PostAuthor: 000zeds » Mon Sep 26, 2016 4:47 pm

2 to 3 months sounds a bit too long :!:
Zeds-R-Us
Top
DavidZ1R
Hardcore
Hardcore
Posts: 1513
Joined: 12th Jun 2011
Location: Bolton Lancs

#6 PostAuthor: DavidZ1R » Mon Sep 26, 2016 7:20 pm

I know but tried two placese and both the same, busy they tell me, to many bloody restorers :lol:
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R
Top
User avatar
gordon62
Custard Cream
Custard Cream
Posts: 529
Joined: 2nd Mar 2009
Location: SOUTHAMPTON

#7 PostAuthor: gordon62 » Sat Oct 01, 2016 7:33 am

Just put my Rear rim in to chromers in Bristol, 2 month... :shock:
Top
DavidZ1R
Hardcore
Hardcore
Posts: 1513
Joined: 12th Jun 2011
Location: Bolton Lancs

#8 PostAuthor: DavidZ1R » Fri Oct 28, 2016 1:13 pm

Bling Bling Bling

Some parts back from the chrome man, still waiting for my wheel rims and grab rail.

Image


Image




Few bits done for the handlebar mounts

Image

And how the controls started out

Image

Image

Happy days
:D
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R
Top
User avatar
Garry.L
Hardcore
Hardcore
Posts: 3140
Joined: 11th Jun 2011
Location: Cheapest Cheshire

#9 PostAuthor: Garry.L » Fri Oct 28, 2016 1:56 pm

Looking rather Nice David. :D

Who did the chroming, and how much?..
Last edited by Garry.L on Fri Oct 28, 2016 1:59 pm, edited 1 time in total.
ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ
Top
User avatar
pertonpc
ZedHead
ZedHead
Posts: 1082
Joined: 3rd Sep 2009
Location: Shropshire
Contact:
Contact pertonpc

#10 PostAuthor: pertonpc » Fri Oct 28, 2016 1:56 pm

I am watching this with interest.
Getting a bit of a Z Thou bug myself at the mo.

Wonder if anyone will ever start to do a decent repro silencer set for them ???

From Mark
Z1-R D1, Z650 B2, Z1-B & ZRX 1200 A1P Catch 'em if you can at www.Zedrider.co.uk
Top
DavidZ1R
Hardcore
Hardcore
Posts: 1513
Joined: 12th Jun 2011
Location: Bolton Lancs

#11 PostAuthor: DavidZ1R » Fri Oct 28, 2016 2:12 pm

Garry.L wrote:Looking rather Nice David. :D

Who did the chroming, and how much?..


Leigh polishing Garry, 330.00 :)
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R
Top
User avatar
Garry.L
Hardcore
Hardcore
Posts: 3140
Joined: 11th Jun 2011
Location: Cheapest Cheshire

#12 PostAuthor: Garry.L » Fri Oct 28, 2016 3:08 pm

DavidZ1R wrote:
Leigh polishing Garry, 330.00 :)


That seems pretty good David, do you know if they do Zorts?.
ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ
Top
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3257
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

#13 PostAuthor: PAULJAC47 » Fri Oct 28, 2016 3:10 pm

pertonpc wrote:I am watching this with interest.
Getting a bit of a Z Thou bug myself at the mo.

Wonder if anyone will ever start to do a decent repro silencer set for them ???

From Mark


You can get them Mark,place in Dunkirk,got some pics from him,but hard to get complete info due to language barrier.
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo

You can't polish a turd, but you can roll it in glitter

Salad is what real food eats.
Anon

PUM 673
Top
DavidZ1R
Hardcore
Hardcore
Posts: 1513
Joined: 12th Jun 2011
Location: Bolton Lancs

#14 PostAuthor: DavidZ1R » Fri Oct 28, 2016 4:25 pm

Garry.L wrote:
DavidZ1R wrote:
Leigh polishing Garry, 330.00 :)


That seems pretty good David, do you know if they do Zorts?.


Only if the baffles can be removed, he had four pipes on his shelf today, can't do my z1r pipe :cry:
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R
Top
DavidZ1R
Hardcore
Hardcore
Posts: 1513
Joined: 12th Jun 2011
Location: Bolton Lancs

#15 PostAuthor: DavidZ1R » Fri Oct 28, 2016 4:28 pm

Need a nos brake lever spring for it, found one in America, going over for it next week, while I'm there might as well take a cruise :D
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R
Top
Post Reply

Return to “Projects”

Who is online

Users browsing this forum: No registered users and 24 guests