Page 1 of 5
					
				Z1B rebuild
				Posted: Thu Jun 16, 2011 4:58 pm
				Author: janluke
				
			 
			
					
				
				Posted: Thu Jun 16, 2011 5:07 pm
				Author: janluke
				Its all there somewhere
 
Heads a bit of a mess another sourced from Mr Ebay 
 
Carbs refurbed thanks to DogsbolloxZ1b
 
Crank was showing signs of rust and a little notchy. General opinion on the site says it would probably have been Ok but I really want to avoid stripping the engine twice so it got refurbed and balanced
 
Mikey got the frame and swingarm stripped of chrome while rechroming and polishing various other bits.
 
 
 
 
After much head scratching I went down the powder coat route for the frame. He achieved a good finish with all the numbers still visible
 
I’m awaiting second oversized pistons from Zed power before rebore and aquablasting of the engine cases and head recondition before the engine rebuild.
That’s about it for now I’ll be sure to update as and when I make any progress
 
			
					
				
				Posted: Fri Nov 11, 2011 6:24 pm
				Author: janluke
				Bits and pieces all coming together
Paintwork back from Hutch today and looks stunning
pics added soon camera fecked at the mement
			 
			
					
				
				Posted: Fri Nov 11, 2011 7:05 pm
				Author: andyb1962
				Chromework looks superb!
			 
			
					
				
				Posted: Fri Nov 11, 2011 7:24 pm
				Author: Ginger Bear
				That's all looking rather lovely. 

 
			
					
				
				Posted: Fri Nov 11, 2011 7:33 pm
				Author: paul doran
				yes I remember this it was coming on nicely
			 
			
					
				
				Posted: Fri Nov 11, 2011 7:40 pm
				Author: janluke
				paul doran wrote:yes I remember this it was coming on nicely
It took a bit of a back seat while waiting for oversized pistons on back order and me out playing on my other bikes.
Now the weathers not so great I'm back on the case
 
			
					
				
				Posted: Fri Nov 11, 2011 7:41 pm
				Author: PJ
				Superb Janluke, 
keep the pics coming!!
			 
			
					
				
				Posted: Sat Nov 12, 2011 12:00 am
				Author: Is Vic There
				Very very nice job  

 
			
					
				
				Posted: Sat Nov 12, 2011 9:00 am
				Author: pertonpc
				Hiya Andy
Good to hear from you again - get that camera fixed mister 

  - dying to see your latest progress.
Noticed some of your engine looks like it was painted black at some time - wonder what the story was there??
Best wishes from Mark
 
			
					
				
				Posted: Sat Nov 12, 2011 9:02 am
				Author: janluke
				Thanks for the positive comment Gemts
Paintwork fresh from Hutch
 
 

 
			
					
				
				Posted: Sat Nov 12, 2011 9:32 am
				Author: Is Vic There
				Bloody hell thats nice  

 
			
					
				
				Posted: Sat Nov 12, 2011 3:00 pm
				Author: Iain marshall
				Going to be a nice one when its finished Andy. If you're needing a hand with the heavy stuff just shout and we'll pop down drink your coffee and watch you working.....  

 
			
					
				
				Posted: Sat Nov 12, 2011 6:16 pm
				Author: janluke
				Iain marshall wrote:Going to be a nice one when its finished Andy. If you're needing a hand with the heavy stuff just shout and we'll pop down drink your coffee and watch you working.....  

 
Thanks Iain I may well take you up on that
Andy
 
			
					
				
				Posted: Sat Nov 12, 2011 7:34 pm
				Author: paul doran
				new paintwork just makres You want to drool