Z1OwnersClub GB

Posted: **Thu Sep 29, 2011 9:13 pm**

Hi! This is my long term project that I'm building from parts which I've purchased over the last few years. I've started with A4 frame that I've modified to fit the Z1000J motor I'm using. The swingarm is an original drag swing arm from years ago! The motor has got a lightened and balanced crank, 1327cc, 430 lift cams, oversize valves, straight cut gearbox, dyna 2000 ignition, lectron carbs, ape studs / nuts / tensioner. The green dream machine shite paint is being replaced by a set my son done for me. My plan is to keep it original looking-ish and have some fun on it! I'm also for a good J head if anyones got one??

Keith

And here's the helmet to go with the bike

Posted: **Thu Sep 29, 2011 9:32 pm**

Tidy!

That's gonna be one hell of a good looking beast!

Posted: **Thu Sep 29, 2011 9:54 pm**

I like that :up

Be good to see a Zed laying rubber up the strip

...Where`s Buzzard :?:

Posted: **Thu Sep 29, 2011 11:03 pm**

Looks great and maybe my teenage useless maybe able to produce something like that, then I can take back all the things Ive said about him :-)

Posted: **Fri Sep 30, 2011 7:15 am**

Posted: **Fri Sep 30, 2011 8:32 am**

Is the Guinnes can for the oil catch tank? :wink:

???

Posted: **Fri Sep 30, 2011 8:36 am**

Looks like you have made a good start to what should be a fun bike. Crofty

Posted: **Fri Sep 30, 2011 8:54 am**

Luv it !!!!....in the process of putting together something similar myself...may be tempted to post some pics in the near future. Not quite as ambitious as yours in the engine dept...mine will run the standard thou lump bored to 1105...great paint ! is your son able to give me a quote for spraying mine?

Posted: **Fri Sep 30, 2011 9:04 am**

lovely paint job on the Helmet

Posted: **Fri Sep 30, 2011 12:16 pm**

Looking Good ZKeith :twisted:

Have a look on the US Ebay several KZ1100 Heads on at the moment :wink:

Posted: **Fri Sep 30, 2011 12:24 pm**

Bring it on............ :twisted:

That looks fookin' well LUSH - give me a boost to get mine sorted for early next year :wink:

Posted: **Mon Oct 10, 2011 7:15 pm**

That's a beaut..love the old school look

Posted: **Tue Oct 11, 2011 4:17 pm**

Helmet

Can't wait to see the bike evolve.
BTW them's some big 'ole slugs goin in that block mate, any idea on power/torque figures you expect to see?

Posted: **Tue Oct 11, 2011 8:52 pm**

Looks very promising. What diameter is the rear rim??

AL

Posted: **Mon Oct 17, 2011 8:19 pm**

Thanks for the comments! not sure on power figures yet, will have to wait for the dyno! The rear tyre is a 150, but can go slightly bigger. Heres a few more pics, i bought a V+H Sidewinder and my son turned up some spacers, hes making me a speedo drive blank at the minute too. Trying to make some space in the shed so i can get stuck in!

Z1OwnersClub GB

Old skool drag zed

Old skool drag zed