Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Marve's BiTsA Z1000j3
Moderators: chrisu, paul doran, Taffus, KeithZ1R
- Zomerset Zed
- 100Club
- Posts: 239
- Joined: 30th May 2014
- Location: Somerset
Re: Marve's BiTsA Z1000j3
Well I’m not dead
Still got the bike
Been busy with life house purchase then our first child
What a roller coaster
I did make a start on the motor before the baby was born
She is 16 months old now got a thread or 2 to helicoil on the cam carrier bolts
Still got the bike
Been busy with life house purchase then our first child
What a roller coaster
I did make a start on the motor before the baby was born
She is 16 months old now got a thread or 2 to helicoil on the cam carrier bolts
Re: Marve's BiTsA Z1000j3
Well managed to get hold of a complete unitrack with a good running motor.
Cleaned it up and had a go at spraying 2 pack paint
I went for gloss black came out well I think
Waiting for the paint to harden up for a few days then il get it in the frame.
Looking at exhaust options now
Cleaned it up and had a go at spraying 2 pack paint
I went for gloss black came out well I think
Waiting for the paint to harden up for a few days then il get it in the frame.
Looking at exhaust options now
Re: Marve's BiTsA Z1000j3
Cheers pigford
Got to order a offset front sprocket as my dad BORROWED MINE
Looking over it I’ve got 3-4 float on the swing arm pivot to sort out.
Then recheck wheel chain alignment.
Keep on building up
Gotta raid dads stash his got a few bits I need
Got to order a offset front sprocket as my dad BORROWED MINE
Looking over it I’ve got 3-4 float on the swing arm pivot to sort out.
Then recheck wheel chain alignment.
Keep on building up
Gotta raid dads stash his got a few bits I need
-
- Custard Cream
- Posts: 804
- Joined: 20th Oct 2016
- Location: Ipswich
Re: Marve's BiTsA Z1000j3
ZZR1100 sprockets fit and have about 14mm of offset
Exhaust wise I think you can get Delkevic, Kerker or Hindle new.
Exhaust wise I think you can get Delkevic, Kerker or Hindle new.
An expanding collection of parts pretending to be a Z1100R and a Yamaha FZ750
Re: Marve's BiTsA Z1000j3
Looking good. Keep up the good work!
Re: Marve's BiTsA Z1000j3
Great progress marv good to see your back at it
Who is online
Users browsing this forum: No registered users and 62 guests