Page 20 of 32
Posted: Thu Apr 16, 2015 10:10 am
Author: Al
That's very annoying. Is that a crack in the hub at the six o'clock position?
Al
Posted: Thu Apr 16, 2015 6:55 pm
Author: Ginger Bear
I don't think so Al.
I'll have a good look when this tool lands.
http://www.ebay.co.uk/itm/110937937883? ... EBIDX%3AIT
I am lucky enough to have another two hubs available, so should be easy to resolve.
Whilst waiting for bits to sort out the clutch, I spent a few hours today sorting out the tail tidy & rear light mount.
Whilst it's fairly robust, the light mounting part of the kit is just too chunky for the small LED tail light I plan to use. And would be visible once the light is fitted.
So I drilled, cut & bent a piece of stainless.
Which fits to the tail piece using the rubber mounting grommets.
Light now sits up nice & close, without any excess bracketry on show.
Illegally sized 'show plate' tucks in nicely.
Posted: Thu Apr 16, 2015 7:59 pm
Author: Jay1969
Will your road legal number plate hang down too low for the rear tyre?
~Jay.
Posted: Thu Apr 16, 2015 8:40 pm
Author: Ginger Bear
Jay1969 wrote:Will your road legal number plate hang down too low for the rear tyre?
~Jay.
I wouldn't think so, besides, it'll only be on once a year.
Posted: Fri Apr 17, 2015 1:04 am
Author: Is Vic There
More importantly, did you enjoy the pub?
Posted: Fri Apr 17, 2015 7:06 am
Author: mick znone
Is Vic There wrote:More importantly, did you enjoy the pub?
better to ask his good lady, she remembers the evening
Posted: Fri Apr 17, 2015 7:46 am
Author: Ginger Bear
Lads, just want you to know I'm a fair chap & when visiting the pub, share the driving with my wife.................
................. I drive there, wife drives home.
Posted: Fri Apr 17, 2015 2:27 pm
Author: Jay1969
I'm too fair, I'm tee-total and drive Debbie everywhere we visit.
Happy not drinking alcohol though.
~Jay.
yo
Posted: Fri Apr 17, 2015 5:06 pm
Author: Hobbo
Ginger baby
Nice tail tidy
phil
Posted: Sat Apr 18, 2015 6:59 pm
Author: Ginger Bear
Had this earlier from Buzzard...........
Afternoon Steve, cylinder head is finished, ready for collection. Buzz@buzzworkz.
Posted: Sat Apr 18, 2015 7:15 pm
Author: Jay1969
All hail Buzzard
Me next then
~Jay.
Posted: Tue Apr 21, 2015 5:44 pm
Author: Ginger Bear
Had a message from Simon at Flying Tiger Coatings earlier........
.......... Me calipers are done & on their way back to me.
Posted: Wed Apr 22, 2015 3:21 pm
Author: ollie
wow steve !!!,they look great
Posted: Wed Apr 22, 2015 7:53 pm
Author: coldsummer
Oh boy they look great
Posted: Fri Apr 24, 2015 5:57 pm
Author: PJ
coldsummer wrote:Oh boy they look great
Bloody hell Simon - where did you get that from?