Z1OwnersClub GB

Posted: **Fri May 24, 2013 10:24 pm**

Now that all the machinery is in situ nice things are beginning to appear inc these hubs to fit Kosman wheels for Pete F's project.
Left side hub turned down from 5" dia 6" long ally bar, right side hub turned down from 5" dia 2" long ally bar,both clamp original Kosman CNC machined spokes, ZX10 double discs, Z900 Speedo drive, made to fit in original Z1 forks with Pretech six pot brake calipers. Next 6" wide rear wheel to machine/ fit. Buzzard.

Posted: **Sat May 25, 2013 7:41 am**

Lovely Job :up

Posted: **Sat May 25, 2013 9:29 am**

Posted: **Sat May 25, 2013 3:57 pm**

Well fookin' LUSH :twisted:

Posted: **Sun May 26, 2013 4:43 pm**

Thats a lovely piece of work.
It puts me to shame,as I have a big milling machine,lathe etc,which I dont think has even been plugged in this year!

Posted: **Wed May 29, 2013 11:58 am**

inspired by this,Ive had my lathe on this morning.

Posted: **Wed May 29, 2013 3:12 pm**

Well done that man, what you making? I'll put up some more pics of other stuff I'm making but I have to go via my mate panzer John coz that photo bucket lark is to complex for a thicko like me. Buzzard.

Posted: **Wed May 29, 2013 3:38 pm**

Good to see you making use of the nice new lathe and milling machine

Posted: **Wed May 29, 2013 3:39 pm**

Nothing as cool as yours.

Ive made a start on making hubs for a rear car wheel conversion. Its an 8x18 (240 tyre),but I havent a clue as to what Im really going to fit it too? I just fancied a few hours at the lathe!
I cant believe somebody as clever as you cant work out how to work photobucket?

Mind you,having said that,the new format they have is terrible!
I'll keep my eyes peeled for progress.

Posted: **Wed May 29, 2013 5:48 pm**

What we need on this website is the ability to put pictures straight off your smart phone directly on to the forum. I can download pictures straight onto Facebook from my gallery, when is the website going to be updated now we don't get a mag any more? I want to put more pics on the site but it needs to be more user friendly. Buzzard.

Posted: **Wed May 29, 2013 6:10 pm**

buzzard wrote:What we need on this website is the ability to put pictures straight off your smart phone directly on to the forum. I can download pictures straight onto Facebook from my gallery, when is the website going to be updated now we don't get a mag any more? I want to put more pics on the site but it needs to be more user friendly. Buzzard.

Agreed,very frustrating for old feck like me :pc

Posted: **Sat Jun 01, 2013 3:42 pm**

Bit more newz from the BuzzardWorkz...

Wheel finished and fitted into Z1 forks complete with pretech 6 pot brakes and ZX10 double discs

Posted: **Fri Jun 14, 2013 8:57 pm**

Great progress, looking really neat :up

Posted: **Wed Jun 26, 2013 2:29 pm**

I'm doing a rear disc conversion for a Z900 bike I'm building for a customer. 4 pot pretech caliper fitted to carrier bracket I've just finished machining, all fitting in a ZX600 Ninja swinging arm with 5" spoked wheel and Z1000 rear hub, more pics later. Buzzard.

Posted: **Wed Jun 26, 2013 8:41 pm**

Very nice, are you making the torque arm for it, or modifying a
z1000 a1 / a2 one to fit or the ZX600 one?

Z1OwnersClub GB

Newz from the BuzzardWorkz

Newz from the BuzzardWorkz

lathe

posting pictures

Re: posting pictures