Page 2 of 4
Posted: Thu Jan 30, 2014 5:06 pm
Author: Harry H
Be careful. I have used tough black as a touch up on an engine had a petrol leak paint reacted. make sure you use engine paint
Posted: Thu Jan 30, 2014 5:30 pm
Author: zed1015
Just like the PJ1 etc, It's not solvent resistant until properly cured.
It's much more durable if baked after curing overnight.
Re: Engine Paint
Posted: Thu Jan 30, 2014 6:01 pm
Author: bulldogbobby
zed1015 wrote:Use the TOUGH BLACK. It is branded both as Simoniz or Sperex in near identical labelled cans.
Cheers mate-will do-I'm guessing that the TOUGH BLACK temperature rating is ok to use on the engine block?
Re: Engine Paint
Posted: Thu Jan 30, 2014 6:10 pm
Author: zed1015
bulldogbobby wrote:zed1015 wrote:Use the TOUGH BLACK. It is branded both as Simoniz or Sperex in near identical labelled cans.
Cheers mate-will do-I'm guessing that the TOUGH BLACK temperature rating is ok to use on the engine block?
Yes! I've been using it for a few years .
Look at page 6 onwards in my zed900 road racer project a few places down from this to see the results.
Posted: Thu Jan 30, 2014 6:12 pm
Author: Harry H
Posted: Thu Jan 30, 2014 8:08 pm
Author: bulldogbobby
Posted: Wed Mar 05, 2014 8:58 am
Author: bulldogbobby
Another step forward ........
Posted: Wed Mar 05, 2014 5:52 pm
Author: sid123
i have z1r speedo on ebay at moment - re-set back to zero - new glass and re painted
look for seller sid123456
Posted: Wed Mar 05, 2014 6:58 pm
Author: bulldogbobby
sid123 wrote:i have z1r speedo on ebay at moment - re-set back to zero - new glass and re painted
look for seller sid123456
PM Sid
Bit More Progress - slowly but surely!.......
Posted: Wed Dec 23, 2015 9:20 am
Author: bulldogbobby
Posted: Wed Dec 23, 2015 11:23 am
Author: Pigford
What did you "soak" the casings in
Posted: Wed Dec 23, 2015 11:36 am
Author: pertonpc
Coming along nicely mate !!
Posted: Wed Dec 23, 2015 12:43 pm
Author: bulldogbobby
Cheers pertonpc!
Pigford wrote:What did you "soak" the casings in
I put them in an 'ultrasonic' cleaning bath - tried a 'heavy' detergent first but it covered the ally in white 'furry' stuff. Cleaned them up again and put them back in with a milder detergent - came out clean as a whistle
Posted: Sun Dec 27, 2015 9:17 am
Author: moriwaki1105
Enjoying this already.....plus I like to have a good snoop in other peoples sheds too.....Great stuff !
Posted: Sun Jan 17, 2016 11:03 am
Author: ollie
wow thats the biggest ultrasonic bath i have ever seen
,looking good already